My 2000 GZ250 Bobber Project
 

Just a couple of pics with what I have done so far. Any suggestions?

Re: My 2000 GZ250 Bobber Project
 

From the bobbers I've seen you need to:
1. Lose the front fender
2. Cut the back fender down to just behind the shock mounts (frame pieces also)

http://s21.postimage.org/wzsd0srxf/bobber1.jpg

http://s24.postimage.org/9a2xc3tkx/bobber2.jpg

You've got a good start... carry on :rawk: :rawk:

Re: My 2000 GZ250 Bobber Project
 

quick question Im freaking out I was trying to just run my bike and forgot it running outside. For some reason the bike revved up high and Im not sure for how long but when i got to it the pipes were glowing red and it smelt like burnt oil. The chrome looking parts on the side are now brown but I see no oil just a burnt smell. PLease dont tell me I blew it up?!!

Re: My 2000 GZ250 Bobber Project
 

Ok I won't say it.At the very least,you seriously overheated it.But it don't sound good.Is there oil in the engine?
:??: :cry:

Re: My 2000 GZ250 Bobber Project
 

There was very little left. I ran to walmart and got more oil and put it back in and it seems to be running good. But Im not sure what I may have done.

Re: My 2000 GZ250 Bobber Project
 

Hard to say.Just ride it for a while & see what happens.It may start to smoke out the exhaust (burn oil) if you done internal damage.But you may have lucked out.These little beasts are tough.That's why you never walk away & leave a bike running.
:) :cool:

Re: My 2000 GZ250 Bobber Project
 

here are a couple of pics

Re: My 2000 GZ250 Bobber Project
 

I just learned that the hard way I guess. I am seriously very worried now!!

Re: My 2000 GZ250 Bobber Project
 

All you can do is ride & hope for the best. :)

Re: My 2000 GZ250 Bobber Project
 

I still don't have it on the road yet I need tires. Can you point me towards wear to get some tires?

Re: My 2000 GZ250 Bobber Project
 

Wow, that is one fascinating color change. You must have cooked the oil pretty good with the high temps. Here is what "I" would do just to be safe. Get a new oil filter and some more oil for an oil change. Run the bike just a minute or so to slightly warm it up and drain the oil and change the filter. You don't want even a small portion of cooked oil in the engine. Make sure the oil is motorcycle specific or anything else that is certified for motorcycle use. Good old Shell Rotella 15-40 will work well and is cheaper than most. Our last 2 bikes were happy with it as a steady diet. Shell finally got around to a moto certification after they realized how many riders were already using it.
Hopefully the engine was not damaged. You now know why you never leave an unattended bike running. Also just be very thankful a child did not get attracted to an unattended bike and get seriously burned.

Re: My 2000 GZ250 Bobber Project
 

That is very true I did learn a valuable leson

Re: My 2000 GZ250 Bobber Project
 

....How long was it out there running on it's own?

That's crazy.

If the internals got hot enough to discolor the external metal... Don't skimp on oil for the refill. Use the best stuff you can find. I would take it for a slow speed run around the neighborhood. You need to monitor how quickly it burns oil and feel, through your butt cheeks, or through your feet, any strange vibrations or anything that feels like that indicates youve done some internal damage. My biggest concern would be the main bearing and how long it is going to survive after that kind of treatment...

I am a little curious about the glowing red exhaust. I understand overheating of the engine, but I don't see why the exhaust would have gotten that hot. Unless the air fuel mixture was off. Check for an air leak...

As I'm writing this, I'm thinking up all kinds of crazy ways to try and keep this thing alive... I would run one main jet size larger. You'll be a little rich, but that's a good thing and can help keep the engine a touch cooler in the future. I'm even considering using a cheap oil to see if the bike will survive and then dump it and replace it after 25 miles or something and see what comes out.

I really hope it all works out.

Re: My 2000 GZ250 Bobber Project
 

I plan on today to run it for a couple miles real slow then dumping it.

Re: My 2000 GZ250 Bobber Project
 

Once you feel comfortable enough to get it out on the road and push it up to speed again, I would recommend having someone tail you... just to be safe... at least the first time.

Also, it might not be a bad idea to give your main case bolts another check to make sure they didn't loosen up. Go easy on tightening though if any of them need it. Any flaws in the casting process of your metal will be exposed now. I don't think it's going to actually be an issue. Just be aware of it. Baby gloves until you feel confident that the machine is still sound.

Re: My 2000 GZ250 Bobber Project
 

I definitely will thx

Re: My 2000 GZ250 Bobber Project
 

That's bloody amazing what you did to that thing by running it for so long. Thanks for the lesson.

That said, I'd do an oil change with oil flush liquid and run it then change it out again. Check the filter for blue metal shavings. If it got that hot and started shredding a bearing you'll see it in there. If not you may just have another good story to tell about the bike. But that's pretty insane.

Re: My 2000 GZ250 Bobber Project
 

So far the bike is running great need to do a valve adjustment. Im working on getting something to adjust the valves first but as far as top end I've gotten it up to 75mph!!!!!! Not bad for a lil 250

Re: My 2000 GZ250 Bobber Project
 

Love the blacked out look! I was thinking about doing the same on some of the chrome parts (headlight,speedo,pipe,shocks,blinker,rear fender pieces,etc..). How did you paint all of that stuff? Did you take it all apart? What kind of paint did you use?

Re: My 2000 GZ250 Bobber Project
 

A rattle can of heat resistant flat black paint would be a good idea. It won't cook off the pipe and still match the rest of the bike.

Re: My 2000 GZ250 Bobber Project
 

Flat black BBQ paint.


:)

Re: My 2000 GZ250 Bobber Project
 

Just got some on it from a friend to test it and it works great!!!!