GZ 250 Forums

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   Troubleshooting (http://www.gz250bike.com/forum/forumdisplay.php?f=19)
-   -   Sidestand starting problem (http://www.gz250bike.com/forum/showthread.php?t=8332)

SomeENG 12-24-2020 12:02 PM

Sidestand starting problem
 
I've been having a problem starting.

When I do the normal process (key on, clutch in, choke, starter)

Nothing happens.

I must do the process AND put the kickstand up WHILE attempting to start for the starter to work.

It's an 07 that I've owned for about three months and put about 1500 miles on, I mostly use it for my work commute approximately 24miles round trip a day.

I guess I'll look for the sidestand switch and inspect/clean it to see if it makes a difference.

Vegas Street Rider 12-26-2020 01:31 PM

If the issue isn't with the kickstand switch, my best guess would be the starter solenoid relay. Unfortunately, the electrical system is not my stronger suit.
I assume you have the transmission in neutral?

SomeENG 01-02-2021 08:18 PM

Yes, bike in neutral. I've been busy with the holidays and haven't done anything about it yet.

For about a week operating the sidestand while attempting to start stopped having an effect so I was just push-starting.

But today operating the sidestand while attempting to start worked.

Tomorrow I'll look at the sidestand switch. It was only $8.00 for another solenoid so I ordered one.

SomeENG 01-09-2021 01:56 PM

Installed the new solenoid and it seems to have solved the problem

Vegas Street Rider 01-09-2021 05:14 PM

Glad to hear you got it resolved. Safe riding.


All times are GMT -4. The time now is 07:32 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.