GZ 250 Forums

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   Troubleshooting (http://www.gz250bike.com/forum/forumdisplay.php?f=19)
-   -   1st to 2nd trouble (http://www.gz250bike.com/forum/showthread.php?t=8260)

Tams 10-30-2019 09:21 PM

1st to 2nd trouble
 
Sometimes (not all the time) when I take off and I'm changing from 1st to 2nd it just doesn't want to go, it's like it's stuck there. Sometimes I need to give it a good lift with the foot to get it to move and sometimes I have to just let the clutch back out and try it again but it seems to be happening more and more. Have only had the bike about 4 months, 2006 model. It apparently came to me with a fairly new clutch.

Any ideas?

wacio 11-01-2019 12:06 AM

Check your clutch adjustment - if its pulling a when disengaged, it gets hard to shift.

5th_bike 11-11-2019 12:39 AM

It's also a little further to shift from 1 to 2 then to the other gears, because it passes by the neutral position.


All times are GMT -4. The time now is 05:46 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.