My 2000 GZ250 Bobber Project
 

Just a couple of pics with what I have done so far. Any suggestions?

Re: My 2000 GZ250 Bobber Project
 

From the bobbers I've seen you need to:
1. Lose the front fender
2. Cut the back fender down to just behind the shock mounts (frame pieces also)

http://s21.postimage.org/wzsd0srxf/bobber1.jpg

http://s24.postimage.org/9a2xc3tkx/bobber2.jpg

You've got a good start... carry on :rawk: :rawk:

Re: My 2000 GZ250 Bobber Project
 

quick question Im freaking out I was trying to just run my bike and forgot it running outside. For some reason the bike revved up high and Im not sure for how long but when i got to it the pipes were glowing red and it smelt like burnt oil. The chrome looking parts on the side are now brown but I see no oil just a burnt smell. PLease dont tell me I blew it up?!!

Re: My 2000 GZ250 Bobber Project
 

Ok I won't say it.At the very least,you seriously overheated it.But it don't sound good.Is there oil in the engine?
:??: :cry:

Re: My 2000 GZ250 Bobber Project
 

There was very little left. I ran to walmart and got more oil and put it back in and it seems to be running good. But Im not sure what I may have done.

Re: My 2000 GZ250 Bobber Project
 

Hard to say.Just ride it for a while & see what happens.It may start to smoke out the exhaust (burn oil) if you done internal damage.But you may have lucked out.These little beasts are tough.That's why you never walk away & leave a bike running.
:) :cool:

Re: My 2000 GZ250 Bobber Project
 

here are a couple of pics

Re: My 2000 GZ250 Bobber Project
 

I just learned that the hard way I guess. I am seriously very worried now!!

Re: My 2000 GZ250 Bobber Project
 

All you can do is ride & hope for the best. :)

Re: My 2000 GZ250 Bobber Project
 

I still don't have it on the road yet I need tires. Can you point me towards wear to get some tires?