GZ 250 Forums

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   General Maintenance (http://www.gz250bike.com/forum/forumdisplay.php?f=22)
-   -   HZ won't go into high rp. it Boggs down (http://www.gz250bike.com/forum/showthread.php?t=8142)

miller.connor25 08-26-2018 01:16 PM

HZ won't go into high rp. it Boggs down
 
just got the back tire replaced and when I got it back it wouldn't start come to find out there was take on the air filter under the seat and like a part of a screen window covering it and now sometimes it won't start but it also won't go above 50 pleas help

Sent from my SAMSUNG-SM-G891A using Tapatalk

Vegas Street Rider 08-26-2018 04:24 PM

Please clarify. Was there tape on the filter holding window screen material around it? If that is correct, I am guessing the air flow to the carburetor is not adequate. Put a stock air filter on it and it should help solve the problem. Was this set up on the bike before you took it in to have the new tire mounted? The fuel and air mixture is critical to get peak performance out of the carburetor. If either one is modified, the bike will not run correctly unless you change the orifice sizes in the carburetor.


All times are GMT -4. The time now is 01:56 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.