Quote:
|
Originally Posted by Bill
I don't know about lubricating the cable but the GZ250 was having a little binding/sticking problem with the clutch and brake levers. It turned out not to be a lack of lubrication of the cable but a need for a small amount of grease (not too much) near the pivot pin. Removed the pin and lubed at the inside of the lever where it contacts the handlebar clamp and it cured the problem.
|
That will do it. I like to put a little lithium grease on any thing that moves when ever ai take it a part. A little grease on the handle bar under my throttle grip made a huge difference in throttle control.