Quote:
|
Originally Posted by Water Warrior
Badbob, the trunk mount was quite easy. Remove the pillion seat, retained the front bracket for the pillion and used a piece of flat plate to mount the trunk mounting plate on. Had a metal shop cut it to size and bend the rear of the plate( approx 1 inch) at an angle to match the mounting bolt of the rear fender. Check bike mods for March 22 for a pic of the trunk and mounting plate.
|
I wonder how I missed that. I thought I was looking at all the posts. This one I would have remembered. Thanks.
Now that I looked at it the posting and there I was. Must have killed a brain cell.