Quote:
|
Originally Posted by ruxpin76
I'm considering just cutting away part of the airbox (bottom, left side except for bracketry, front) and putting the new filter in the "inside" of the old airbox area...
|
You may already be aware of this but you need to consider air box changes real carefully BECAUSE the entire air box on a GZ is "downstream" from the stock filter. That is, unless you put in a filter that is radically different, any holes you make in the air box will let in UNFILTERED air; not good.
AND I consider a K&N filter to be only slightly better than a piece of screen wire when it comes to filtering out dirt from the air.
