GZ 250 Forums - View Single Post

Canuck · 10-14-2010, 11:53 AM

I'm pretty fortunate for this post.

To have someone describe EXACTLY the same situation I'm in is pretty lucky.

Takes alot of potential expensive guess work out of it.

Currently the bike still has a hanging stud/nut under the two exhaust pipes. Makes a loud POP upon startup, and goes away after being ridden awhile. However when taking off in first gear it definetely "snap crackle and pop's" until it reaches about 15-20 km/h then it sound normal.

In the future im hoping to do the same as this post. new gaskets new stud/nut etc

thanks again for this post!

10-14-2010, 11:53 AM	#30
Canuck Senior Member Join Date: Aug 2008 Location: Vancouver Island Posts: 159	Re: Rebuilt the engine! I'm pretty fortunate for this post. To have someone describe EXACTLY the same situation I'm in is pretty lucky. Takes alot of potential expensive guess work out of it. Currently the bike still has a hanging stud/nut under the two exhaust pipes. Makes a loud POP upon startup, and goes away after being ridden awhile. However when taking off in first gear it definetely "snap crackle and pop's" until it reaches about 15-20 km/h then it sound normal. In the future im hoping to do the same as this post. new gaskets new stud/nut etc thanks again for this post!
	0