Re: fork oil leak
I'm in trouble again, Blaine. I put the fork back together and this put some pressure on the rod, and the bolt is harder to turn, but it still spins. I can put more pressure on the rod if I find a way to compress the fork and hold it there while I try to turn the screw.... Or, I can take the spring out again and press a dowel down there onto the rod to try to hold it, but having never seen these parts I don't know what I'm going to damage.... Any ideas?
__________________
Lovin' every minute of it.
2005 GZ250 (sold after 26000km)
2013 CB500XA
|