[geezer]

you must start by doing the open throttle circuit first (MAIN JET) so after gettng the bike warmed up on the old spark plug, shut it down and remove the bolts holding the tank down and remove [attachment=1:1pi3cbgh]DSC09762.JPG[/attachment:1pi3cbgh]the engine shild covering the spark plug. remove the old one and put in the new properly gaped one (.024-.028in) then push bike out to the street and once youve got a clear shot start it and go WIDE ASS OPEN! ride it like you stoll it for as long as you can, then hit the kill switch and stop. remove the spark plug and inspect.[attachment=0:1pi3cbgh]DSC09763.JPG[/attachment:1pi3cbgh] mine was still looking lean and i already installed a 136 main jet so now i gotta get me a 140 and retest. i cant move on till i finish with the main jet so

to be continued... i hope i did a good job i aint much of a teacher lol if you got questions or im wrong about someting let me know