Quote:
Originally Posted by Gz Rider
Quote:
Originally Posted by greatmaul
Ok, I'm going to try this also, because my led wiring is all ridiculously routed (and shorting out) under the tank, but I have a question.
I know you would have mentioned this, but doesn't the gas all run out? Do you have to drain the tank first?
|
Assuming your petcock is working correctly, if the switch is in the "ON" position the gas only flows if vacuum is applied via the smal tube that connect to the inside (back of the valve). Otherwise you will just get a few drips when you disconnect the fuel tube (larger).
|
Yup.
Just a little more than a teaspoon full.