GZ 250 Forums - View Single Post

Water Warrior 2 · 09-29-2012, 05:34 PM

You will need the dimensions of the new bars. It is critical not to have new bars that will stretch or hinder the smoothness of the cable operation. The front brake hose is your lifeline so it must never be put in danger of damage.
GZ bar measurements:
height, 7 inches
width, 28 inches
pull back, 10 inches
center, 6 inches
clamp area, 2 1/4 x 4 inches.

You can always live with a little extra slack in the controls if that occurs. Let us know how you make out.

09-29-2012, 05:34 PM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Newbie handlebar question You will need the dimensions of the new bars. It is critical not to have new bars that will stretch or hinder the smoothness of the cable operation. The front brake hose is your lifeline so it must never be put in danger of damage. GZ bar measurements: height, 7 inches width, 28 inches pull back, 10 inches center, 6 inches clamp area, 2 1/4 x 4 inches. You can always live with a little extra slack in the controls if that occurs. Let us know how you make out.
	0