Quote:
|
Originally Posted by Plavanchy
So you pull old filter off carefully and press new one on?
|
The filter cap is held in place by 3 hex head nuts. Firstly you will need some rags or paper towels to place just below the filter to catch drips. Remove the nuts and slowly pull the cap off. The filter has a coiled spring that will try to pop out as the cap is removed, make sure to put it back in the way it comes out. Re-assemble with new filter. Do not get too muscular when tightening the cap in place. Just snug the cap nicely and the O-ring does the sealing.