[grasshopper]

this fishtail pipe was 30 inches long. I had to cut a few inches off and cut the bracket off the front and cut the rear bracket shorter and drill a hole to mount it in the factory position. I also had to cut a few inches off the header pipe where the two come together. I don't have a torch or a welder so I had to make an angle cut on the header pipe to try to keep the fishtail even with the swing arm. it is mounted temporary right now. it has a gap that needs to be fixed. my friend is gonna fix and weld it for me. I put the factory plate over the connecting pipes. the header slides into the fishtail about three inches.