GZ 250 Forums - View Single Post

osborne · 05-10-2014, 03:22 PM

The three screw in jets in the carb......they don't get O-rings, correct? Man, Im stumped. This bike warms up and the RPMs come down and it dies. For the life of me it acts like fuel starvation. I tore apart the gas cap to make sure it isn't a plugged vacuum equalization hole. Thing is, it takes hours before it'll start up again once it dies. Far longer than you'd expect either from an overheating issue or a fuel starvation issue.

All the answers and posts Ive seen here touching on this don't seem to account for that excessive time factor before it'll start back up. And when it does start, it fires right up on one touch.....no choke, no throttle.

05-10-2014, 03:22 PM	#29
osborne Member Join Date: Apr 2014 Posts: 46	The three screw in jets in the carb......they don't get O-rings, correct? Man, Im stumped. This bike warms up and the RPMs come down and it dies. For the life of me it acts like fuel starvation. I tore apart the gas cap to make sure it isn't a plugged vacuum equalization hole. Thing is, it takes hours before it'll start up again once it dies. Far longer than you'd expect either from an overheating issue or a fuel starvation issue. All the answers and posts Ive seen here touching on this don't seem to account for that excessive time factor before it'll start back up. And when it does start, it fires right up on one touch.....no choke, no throttle. __________________ Last edited by osborne; 05-10-2014 at 03:43 PM.
	0