Ok so here is the only picture I seemed to have taken of the bracket and how I did the trunk before I mounted it. So what I did was the screw holes bracket (hope that makes sense) is set under the luggage rack and the rest of the bracket is on top. Once I used the ring thingies (don't remember what they are actually called) it was so solid I was able to fully stand the bike up off the kick stand and shake it around without any movement of the bracket. So after that I was able to mount the trunk to the provided mount as it said in the directions. All in all it was really easy.
Lesson learned is to make sure you check the setup of the trunk AND saddle bags when mounting it or you may miss align and not be able to open the saddlebags. Thank god my remedy was simply to move the saddlebags one screw hole lower on the brackets they provided.
Next step now is to mount the power point and iPhone holder. After that the daughter has asked for a cup holder on the rear and also I'm considering getting the Butty Buddy to make it more comfortable for her as well. After that I'm looking at a fairing, lol once I'm done it's going to look like it weighs a ton but actually it will in the end only weigh an extra 10-15 pounds.
