so i have hard wired clutch,neutral,sidestand switches to guarantee continuity,
side stand relay checked out ok ,
coil seemed within tolerances - the coil wires couldnt be the wrong way round could they?
checked r/h switchgear ,stop switch/started all working as they should.
it has brand new battery showing good charge.
tried different spark plugs
My haynes book only shows the ignitor test with a different model (gs125) where the pickup wires are on a seperate plug to the rest of the wires so can be unplugged and check for spark.. could i do the test with the cdi box plugged in and just probe wires?
getting frustrating.haha
|