Quote:
Originally Posted by 351 power
Thanks guys. I am changing that front tire soon as everything arrives. May try bleeding that today. Any suggestions for the best job done? This bike had been sitting a few years and I've run it a couple summers now and this is the first real issue to pop up.
|
Bleeding is easy......Make sure you keep resovior topped up as your doing it....Put a clear hose over bleeder & into a small jar.....Pump up lever till firm.....While keeping pressure on lever open bleeder slowly......You will here & feel the fluid & air escaping....when lever bottoms out close bleeder & release lever.......Repeat till you have firm lever & nice clean fluid coming out........You now have done two things......Bled & flushed the system of all old dirty fluid.