GZ 250 Forums - View Single Post

Vegas Street Rider · 04-30-2018, 05:27 PM

I would check the petcock and make sure the vacuum hose on the back side of it is good and snug just for starters. Like Derby Dave mentioned, try running it on the prime setting. If that checks out, you might even want to pull it out and check the inlet screens to make sure something didn't slough off from inside the tank and plug the screens.

04-30-2018, 05:27 PM	#10
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,089	I would check the petcock and make sure the vacuum hose on the back side of it is good and snug just for starters. Like Derby Dave mentioned, try running it on the prime setting. If that checks out, you might even want to pull it out and check the inlet screens to make sure something didn't slough off from inside the tank and plug the screens. Last edited by Vegas Street Rider; 04-30-2018 at 05:29 PM.
	0