Thread: Charging issue
View Single Post
Old 05-12-2018, 03:53 PM   #3
Pete
Junior Member
 
Join Date: May 2018
Posts: 3
Bought a new battery and charged as instructed. The voltage is 13.05.
When the bike is started I can’t get any more then 12.3 even with full throttle. As it runs it loses voltage. However, again if I disconnect the two wire plug from the rectifier and back probe it at the regulator side it is producing 14.5 volts. As soon as I plug it back into the bike it drops back down to 12.3 and declines. Should the bike stay Running if the battery is takin out of the circuit? I’m trying to eliminate possibilities.
Also, I over laid positive and negative wires from the regulator to the battery to eliminate any possible corroded wires. Same result. Could it be a week stator?



Login or Register to Remove Ads
Pete is offline  
Reply With Quote