Update on replacing the front fork seals. I got everything taken off of the front forks and drained the old oil out. My problem is I can't get the damper rod bolts out of the bottom of the forks. I made sure to do a "quick flick" with my ratchet to break them loose but they just ended up turning the whole damper rod inside the tube. I also tried the broomstick in the tube to hold the damper rod while I tried to break the bolt loose, but no luck.
Anyone have any other suggestions? Worst case scenario, I will take the forks in to the motorcycle shop and have them break them loose for me. It shouldn't take much shop time, but I still hate spending the extra cash.
Login or Register to Remove Ads
|