GZ 250 Forums - View Single Post

wacio · 10-12-2019, 08:07 PM

If you have low compression due to head gasket - there is no fixing by applying gasket maker. You'll have to fix it right. Buy gasket kit and replace head gasket at very minimum.
BTW - check oil level and state. If you have way too much oil and especially gas in oil - you will have good chance of blowing head gasket or cylinder gasket - due to high pressure in the crank case. If your oil smells like gas - it means petcock, carb needle valve problem (both) - needing urgent fix. Remember - gas is no lubricant - 3 quarts of gas in oil is not good for the engine...

10-12-2019, 08:07 PM	#4
wacio Senior Member Join Date: Apr 2016 Location: Illinois Posts: 174	If you have low compression due to head gasket - there is no fixing by applying gasket maker. You'll have to fix it right. Buy gasket kit and replace head gasket at very minimum. BTW - check oil level and state. If you have way too much oil and especially gas in oil - you will have good chance of blowing head gasket or cylinder gasket - due to high pressure in the crank case. If your oil smells like gas - it means petcock, carb needle valve problem (both) - needing urgent fix. Remember - gas is no lubricant - 3 quarts of gas in oil is not good for the engine... Last edited by wacio; 10-12-2019 at 08:10 PM.
	0