[raddad70]

Well I got the new starter relay put it in turned the key and zilch! Dang it! Started tracing wires again. I had continuity on all 6 wires from the ignition switch through the wire harness. This time I was just looking for 12v to the switch- red wire. Nothing! Wait a minute! Looked at the service manual on checking the starter relay again and fond my problem. The picture is deceiving- it shows the 2 lugs with the negative and positive symbols next to them and a schematic of the relay under that. I had the reversed! Now the bike runs! KISS - keep it simple stupid!