GZ 250 Forums - View Single Post

SEGACDX · 07-05-2023, 02:37 PM

I have an old 2008 GZ that had a bad piston and head, smoked awfully.

Changed out the piston and cylinder with a rebuild kit, all new rings, pistons and cylinder.

Problem is I cannot get it to start. I checked the valve clearance, has spark, carb was cleaned 3 times, just will not start up.

Camshaft timing should be good and lined up.

Anyone able to help me figure out what's wrong?

07-05-2023, 02:37 PM	#1
SEGACDX Junior Member Join Date: Sep 2017 Location: Chilliwack BC Canada Posts: 3	Bike wont start, New cylinder I have an old 2008 GZ that had a bad piston and head, smoked awfully. Changed out the piston and cylinder with a rebuild kit, all new rings, pistons and cylinder. Problem is I cannot get it to start. I checked the valve clearance, has spark, carb was cleaned 3 times, just will not start up. Camshaft timing should be good and lined up. Anyone able to help me figure out what's wrong? Login or Register to Remove Ads Last edited by SEGACDX; 07-05-2023 at 02:43 PM.
	0