GZ 250 Forums - View Single Post

Vegas Street Rider · 06-05-2017, 01:53 PM

I believe it is on the right side of the carb body under a brass cover cap. These thing are set up pretty lean coming from the factory. Turn it all the way in a then back it out around 2.5 turns for starters and then adjust from there as needed. I know there are pictures of the location on the forum but I can't find it at this time. Someone else will probably remember and steer you in the right direction.

06-05-2017, 01:53 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,089	I believe it is on the right side of the carb body under a brass cover cap. These thing are set up pretty lean coming from the factory. Turn it all the way in a then back it out around 2.5 turns for starters and then adjust from there as needed. I know there are pictures of the location on the forum but I can't find it at this time. Someone else will probably remember and steer you in the right direction. Last edited by Vegas Street Rider; 06-05-2017 at 01:59 PM.
	0