GZ 250 Forums - View Single Post - How-to: Install MC Engine Guard / Crash Bar

waya · 04-04-2011, 06:42 PM

ACK! My foot brake hits the MC Engine Guard!
[attachment=2:1wzua6a5]DSCI0015.JPG[/attachment:1wzua6a5]

I had adjusted the screw here to be further up the cable.
[attachment=1:1wzua6a5]DSCI0018.JPG[/attachment:1wzua6a5]

Now it doesn't hit.
[attachment=0:1wzua6a5]DSCI0019.JPG[/attachment:1wzua6a5]

For each one full revolution of the adjustment screw, I tested the brake to see if it would hit. I stopped as soon as it didn't by hand pressure and I could see a little gap.

I wish to confirm this is the correct thing to do!

04-04-2011, 06:42 PM	#16
waya Senior Member Join Date: Mar 2011 Location: Marietta, GA Posts: 116	ACK! My foot brake hits the MC Engine Guard! ACK! My foot brake hits the MC Engine Guard! [attachment=2:1wzua6a5]DSCI0015.JPG[/attachment:1wzua6a5] I had adjusted the screw here to be further up the cable. [attachment=1:1wzua6a5]DSCI0018.JPG[/attachment:1wzua6a5] Now it doesn't hit. [attachment=0:1wzua6a5]DSCI0019.JPG[/attachment:1wzua6a5] For each one full revolution of the adjustment screw, I tested the brake to see if it would hit. I stopped as soon as it didn't by hand pressure and I could see a little gap. I wish to confirm this is the correct thing to do! __________________ --- Worth the listen: http://www.financialsense.com/financial-sense-newshour
	0