GZ 250 Forums - View Single Post

bhppy101 · 10-03-2007, 11:17 PM

I picked up my GZ last week for my girl friend to start riding. I felt as if the seat had a little too much bulk to it so I decided to shave it down and re-upholster it with smoother vinyl.

The first step was to remove all the staples holding the stock vinyl. I used a flat screwdriver to pry them loose then went back and pulled them with some needle nose pliers.

10-03-2007, 11:17 PM	#1
bhppy101 Junior Member Join Date: Oct 2007 Posts: 17	Modified seat (Close Shave) I picked up my GZ last week for my girl friend to start riding. I felt as if the seat had a little too much bulk to it so I decided to shave it down and re-upholster it with smoother vinyl. The first step was to remove all the staples holding the stock vinyl. I used a flat screwdriver to pry them loose then went back and pulled them with some needle nose pliers. Login or Register to Remove Ads
	0