[benmb]

Wanted to install drag bars.. fuel tank in the way.

With bar clamp in hand, went to Lowe's...

1.) 2 15/16" socket, the long ones. 4-5$
2.) 5" long 9/16" bolts, lock washers, nuts, etc. (Very odd - Suzuki is metric, but the head on the 9/16" bolt fits in the bar clamp perfectly..)
3.) Pipe nipples and washers to "fill the space" inside the socket (could probably fill with JB Weld or gasket rubber material if so inclined)
4.)Threadlocker and proper torque on bolt/nut highly recommended..

Put it all together.. Taking measurements and clamp to Lowe's with you highly recommended..