[haraldduus]

Background: I was out driving in heavy rain when suddenly the machine stalled and could not start again. I found out that it was a fuse in the ignition circuit 10 Amp had gone. I replaced it with a new one.

I have checked the, sidestand ciucitbreaker and, clutch switch also. The problem now is that I can not start the machine with the self-starter, but only by running the machine .

It has gradually become more difficult, in the beginning I could even without help, now it is not possible without help. Everything in the electrical system havs been measured and tested and there was nothing that seemed suspicious. Relays have been thoroughly measured, nothing found. Ignition coil and sparkplug cap are replaced and the spark plug as well.

We also cleaned the carburetor through and adjusted the maindolmen screw and set correctly. The spark plug still appears to show that the machine dont get enough gasoline (electrodes and insulation seems pale and not "coffee-colored").

So what seems to be the problem, what have I overseen? HELP!!!