GZ 250 Forums - View Single Post

Sarris · 06-10-2010, 05:35 PM

You can install the bags by inserting the split throw over tongue behind the fender support rails. The bag support rails need to be installed to create a large enough gap to slip the bag tongue behind the fender support.

See my previous post here: The Sarris GZ... Look about halfway down for the description.

Further explanation here: Further Explanation & Photos

Here is how to make a heat shield (necessary) to keep from burning your right bag. Heat Shield... I have a photo towards the bottom of the page.

:2tup:

06-10-2010, 05:35 PM	#6
Sarris Senior Member Join Date: May 2007 Location: New Port Richey, Florida USA Posts: 1,348	Re: DIY rear rack You can install the bags by inserting the split throw over tongue behind the fender support rails. The bag support rails need to be installed to create a large enough gap to slip the bag tongue behind the fender support. See my previous post here: The Sarris GZ... Look about halfway down for the description. Further explanation here: Further Explanation & Photos Here is how to make a heat shield (necessary) to keep from burning your right bag. Heat Shield... I have a photo towards the bottom of the page. :2tup: __________________ Prudent riders live longer than moron riders.
	0