[bwader]

I had another 6mm head bolt to replace 30mm long. Advance had it. It's the one under the valve adjust covers.

I have valve cover on and bolts finger tight with permatex black Max oil resistance sealer.
Next torque to 7 foot pounds.
I got the exhaust valves adjusted and one intake valve to adjust and turn 720 degrees and check again.
Then compression check to see what I got.
It started before puffing out the head gasket.

I had to remove the permatex from before as I realized I couldn't get that long 6mm bolt in last like I tried.
I forgot I had to take that one off last and to put it in place first.