[trykemike]

hey Easy I did a test with the air filter. I took it out to have it cleaned at work with compressed air. I took off the diverter and inhaled to check the air flow near the bottom of the filter. I then put the diverter back on and performed the same test I noticed more restance. I drilled a 1/2 inch hole in the centre of the diverter. I reattached the diverter and installed the filter ( which was clean ) I took the bike for a 100 km ride on the main highway ( speed limit 100 k/hr ) the bike hit a flat spot on accelleration and top end stopped @ 110 k/hr so I pulled the choke lever a little bit top end went to 125 k/hr and the flat spot was eliminated.