GZ 250 Forums - View Single Post

blue06gz250 · 10-03-2015, 11:53 PM

I have an 06 GZ250 that wont take throttle after having the carb cleaned. The slide moves in the carb but very slowly. If i start it with the choke on it will idle fine and idle without the choke on. When I take the choke off and try to give it throttle it will die. I have had the carb cleaned at least 5-7 times and no luck. My mechanic thinks that the slide not moving like it should is the problem but not completely certain. Any help would be appreciated.

10-03-2015, 11:53 PM	#1
blue06gz250 Junior Member Join Date: Oct 2015 Posts: 1	Gz250 wont take throttle I have an 06 GZ250 that wont take throttle after having the carb cleaned. The slide moves in the carb but very slowly. If i start it with the choke on it will idle fine and idle without the choke on. When I take the choke off and try to give it throttle it will die. I have had the carb cleaned at least 5-7 times and no luck. My mechanic thinks that the slide not moving like it should is the problem but not completely certain. Any help would be appreciated. Login or Register to Remove Ads
	0