GZ 250 Forums - View Single Post

Vegas Street Rider · 11-03-2021, 05:19 PM

You need to let it set for a bit and then work your starter switch several times so that the contact points get the solution on them. There are no guarantees it will work if the switch is actually bad, but it might work and save you some serious coin.

Fortunately, it is very dry here in the desert and those issues don't usually come up. These contact cleaners will dry quickly so you are not looking at a lot of time before testing the switch.

11-03-2021, 05:19 PM	#4
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,089	You need to let it set for a bit and then work your starter switch several times so that the contact points get the solution on them. There are no guarantees it will work if the switch is actually bad, but it might work and save you some serious coin. Fortunately, it is very dry here in the desert and those issues don't usually come up. These contact cleaners will dry quickly so you are not looking at a lot of time before testing the switch. Last edited by Vegas Street Rider; 11-03-2021 at 05:27 PM.
	0