Thanks Strelok!
I'd like to shoot in HD but for now this is the best I've got. I used this
ultra-simple setup to capture video using my daughter's discarded
digital camera. That's a hex head cap screw, lock washer, and
rubber washer holding a piece of aluminum bar (1/8" x 3/4"
from Rona) onto the fork bracket. The camera is fixed
with a couple of rubber washers, a wing nut, and a
socket head cap screw with knob cap. I also have
a lanyard clipped onto the camera and tied onto
my handlebars as a fail-safe measure in case
something rattles loose. I found this
placement resulted in the least
amount of vibration. Now to
work on noise reduction....