View Single Post
Old 04-04-2011, 10:38 PM   #19
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Re: How-to: Install MC Engine Guard / Crash Bar

Quote:
Originally Posted by cayuse
IIRC, there's an adjustment screw on the brake pedal itself which you can use to alter the position of the brake pedal. Don't stop at hand pressure though, you're foot is going to put a lot more pressure on there when you want braking power.
The owners manual will give you the procedure for adjusting the pedal properly. Keep in mind the measurements will vary with your feet as they are not near as tiny as the feet of the guy who wrote the manual. You will also have to readjust the rear brake light switch to come on just before the brakes start to drag when you step on the pedal. It is just a matter of turning the switch which is threaded and easy to do.
If all else fail just bend the pedal to the side a bit if it will provide clearance. Above all the brake pedal has to be there under your foot when needed, not somewhere in the vacinity and you have to search for it.
Water Warrior 2 is offline  
Reply With Quote