Thread: Jetting: Part 1
View Single Post
Old 08-05-2007, 09:56 PM   #19
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Quote:
Originally Posted by Jaime
I've installed the filter above, but it's nearly as restrictive as the original one, so I'm going to buy another with bigger filtrating surface. Then I'll try the jets and maybe I'll start the "Jetting: PART 2" section.
If your bike was sold new in Spain, you may be in an ENTIRELY different situation than those of us in the US and Canada. You probably have bigger jets already.

Well, I just TRIED to look it up in my service manual. Alas, I can't really tell what the carb. specs. are for Spain. It depends partly on what year model it is.

At any rate, the carb mods are only required if you open up the air intake, open up the exhaust a bit and notice a DECREASE in performance (or no change). If you notice a slight INCREASE in performance, then tinkering with the carb. is probably a waste of time.
__________________
Loud pipes risk rights!
Easy Rider is offline  
Reply With Quote