GZ 250 Forums - View Single Post

suzukix668 · 10-06-2018, 07:38 PM

Its easer to do the valves with a metric feeler gauge the intake is .05 to .06 MM
the ex is .09 to .11MM after each valve adj you must rotate the engine than ck the valves again after each adjustment one valve at a time

10-06-2018, 07:38 PM	#3
suzukix668 Junior Member Join Date: Nov 2010 Location: la ca Posts: 23	Its easer to do the valves with a metric feeler gauge the intake is .05 to .06 MM the ex is .09 to .11MM after each valve adj you must rotate the engine than ck the valves again after each adjustment one valve at a time Login or Register to Remove Ads
	0