|
Very likely. My new turn signals (front) only came with two wires and coming off of the bike are three. I understand the stock lights had a dual running light and that's where the third wire comes into play. So I played with different wire combinations and finally got the signals to work... Te running lights don't.
What was strange to Me during the mod is the wire colors coming off of the bike were tre same on both sides . The left side hoax GRAY/GREEN/BLACKWHITE. and the right side had BLACK/WHITE/BLACKWHITE.... I'm at work now so I'm not sure how I have them wired in but it took some guessing to get the blinkers working.
Which color is the ground? Is it feasible to even use the blinkers with just two wires?
Login or Register to Remove Ads
|