GZ 250 Forums - View Single Post - Generator / Rotor Bolts

clofan · 03-15-2014, 06:20 PM

Fixed it! Or at least, well on the way.

Unclogged the oil passageway, and used some JB Weld to patch it:

New bolts, WITH blue threadlocker:

My day's 'Workstation':

I buttoned it back up, and it started up! Killed it because I need to 1) charge the battery, 2) change the oil, and 3) let the weld cure. So, hopefully tomorrow I'll be riding!.

03-15-2014, 06:20 PM	#11
clofan Junior Member Join Date: Mar 2014 Posts: 29	Fixed it! Or at least, well on the way. Unclogged the oil passageway, and used some JB Weld to patch it: New bolts, WITH blue threadlocker: My day's 'Workstation': I buttoned it back up, and it started up! Killed it because I need to 1) charge the battery, 2) change the oil, and 3) let the weld cure. So, hopefully tomorrow I'll be riding!. Login or Register to Remove Ads Last edited by clofan; 03-15-2014 at 07:03 PM.
	0