Quote:
Originally Posted by mainlinecoffee
Hey water warrior did you ever resurface a flywheel?
|
Nope, never had the pleasure or need to do the deed.
But I did have a little trouble with the coatings on clutch plates you mentioned. Some of the materials can be a little porous. Once I did a no no and put in the wrong oil for the bike and the oil was absorbed by the plate coating. And then the coating proceeded to swell up and reduce the plate clearances. The clearances came back as the plates wore a bit.
Not one of my finer moments but nothing was damaged. I have to admit to somehow using Dextron instead of moto specific oil. I did switch to Motul 2 stroke specific oil and the KDX was very happy after that.