Quote:
Originally Posted by Shawnski451
I'm currently dealing with this same situation. I bought Volar pads from Amazon and they were too tight. I tried to ride the bike to break them but they started to get hot. Luckily, I brought some tools and the old pads with me and swapped them in a parking lot. I'm going to mic the new pads up and see what I got. Thanks for the input.
|
Let me know if you need any advice. It's pretty easy to sand them down but the utmost effort should be put into them being sanded evenly. I found that pressing the pad onto the sandpaper on their center of mass somehow didn't sand it evenly.