Creating a GZ250 Bobber - Page 3

kedebrav00 · 11-22-2010, 12:14 PM

yeah that was a rookie mistake, my mechanic was going crazy when he saw that....lol

Shammua · 03-01-2011, 12:55 AM

Can you tell me what kind of paint you used? I can't tell from the picture.
Can you take another pic of the handle bars now so I can see better how it looks finished?
From the day my friend parked her bike in my garage to now that I have bought it from her I have wanted to do close to the same thing.
Oh yeah what kind of tires are those? Are those still the same tires? They seem to be closer to the same size, but then again that could just be me.
Would you also take a pic of the rear so I can see light placement?

All in all I plan on some heavy modding of my GZ250. Then when my daughter is old enough she is getting it and I will by then have a larger bike of my own.
How much cutting did you have to do and what was your main cutting tool?

For everyone else reading this, is there much to do that I can finally justify getting the welder I have been wanting? (FYI I do all my own auto work too, including mods)

Thanks I will be posting more and more once I get this little gem on the road and it warms up.

Matt Holland

alantf · 03-01-2011, 05:44 AM

Quote:

Originally Posted by Shammua

is there much to do that I can finally justify getting the welder I have been wanting?

Even if there isn't, just tell your wife that there IS :whistle: That way, she'll let you get one. It's a great tool to have, & I've always wanted one, but never had a good enough excuse. :roll:

blaine · 03-01-2011, 06:52 AM

Quote:

Originally Posted by Shammua

Can you tell me what kind of paint you used?

One word of caution.Be careful when filling up.One drop of gas can ruin a paint job done by spray can,unless it is professionally clear coated.

:cool:

Shammua · 03-01-2011, 10:06 AM

Quote:

Originally Posted by blaine

Quote:

Originally Posted by Shammua

Can you tell me what kind of paint you used?

One word of caution.Be careful when filling up.One drop of gas can ruin a paint job done by spray can,unless it is professionally clear coated.

:cool:

:retard: REALLY!!!! :neener: Yeah I learned that lesson the hard way with my Jeep Wrangler. I did some painting on it with a rattle can and then has some grease on it and didn't think about it and cleaned the grease (and paint) right off with gas... lol
So with that being said do you have any suggestions for a good clear coat seal?

Sham

blaine · 03-01-2011, 03:12 PM

If you want to do it yourself,you need to use a two part clear coat.There is one you can buy in aerosol called SprayMax.It must be used as soon as you activate the two parts or it will harden in the can.Google SprayMax and decide for yourself.

:cool:

11-22-2010, 12:14 PM	#21
kedebrav00 Junior Member Join Date: Jun 2010 Location: New York Posts: 23	Re: Creating a GZ250 Bobber yeah that was a rookie mistake, my mechanic was going crazy when he saw that....lol Login or Register to Remove Ads
	0

03-01-2011, 12:55 AM	#22
Shammua Member Join Date: Feb 2011 Location: Virginia Beach, VA. Posts: 79	Re: Creating a GZ250 Bobber Can you tell me what kind of paint you used? I can't tell from the picture. Can you take another pic of the handle bars now so I can see better how it looks finished? From the day my friend parked her bike in my garage to now that I have bought it from her I have wanted to do close to the same thing. Oh yeah what kind of tires are those? Are those still the same tires? They seem to be closer to the same size, but then again that could just be me. Would you also take a pic of the rear so I can see light placement? All in all I plan on some heavy modding of my GZ250. Then when my daughter is old enough she is getting it and I will by then have a larger bike of my own. How much cutting did you have to do and what was your main cutting tool? For everyone else reading this, is there much to do that I can finally justify getting the welder I have been wanting? (FYI I do all my own auto work too, including mods) Thanks I will be posting more and more once I get this little gem on the road and it warms up. Matt Holland
	0

03-01-2011, 03:12 PM	#26
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: Creating a GZ250 Bobber If you want to do it yourself,you need to use a two part clear coat.There is one you can buy in aerosol called SprayMax.It must be used as soon as you activate the two parts or it will harden in the can.Google SprayMax and decide for yourself. :cool: __________________ If at first you do succeed, try not to look surprised.
	0