Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > General Maintenance

Reply
 
Thread Tools Display Modes
Old 08-15-2014, 06:54 PM   #41
5th_bike
Senior Member
 
5th_bike's Avatar
 
Join Date: Oct 2007
Location: HoCo, Maryland
Posts: 1,349
He already took Fawlty's advice, his last time here was more than a year ago. Mounted the pad on his keyboard real well.
__________________
2005 "Saturn Black", stock + tach



Login or Register to Remove Ads

Last edited by 5th_bike; 08-15-2014 at 07:02 PM. Reason: typo
5th_bike is offline  
Reply With Quote
Old 08-21-2014, 08:03 PM   #42
bschift
Junior Member
 
Join Date: Aug 2013
Location: Whitney, TX
Posts: 13
Why am I the only stupid one.

Well, I made these stands but I must be missing something. When I try to slide it under the swing arm on the right side the bottom of the stand hits the tire before it gets under the swing arm. I checked all my measurements and they seem to be right. I can straighten the bike up then push the stand under the swing arm from the right, but this is a little dicey for a one-man operation. Does my stand just lean to much? Has anyone else seem this?

Thanks.
bschift is offline  
Reply With Quote
Old 08-22-2014, 04:47 PM   #43
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
As long as the base of your stand and the vertical leg are flush, then you should be fine.

You do have to tilt the bike just a smidge to get them under. But it's no more precarious than trying to lift any other bike onto a center stand. Once you get a feel for it you'll be fine.



Login or Register to Remove Ads
jonathan180iq is offline  
Reply With Quote
Old 08-22-2014, 07:10 PM   #44
bschift
Junior Member
 
Join Date: Aug 2013
Location: Whitney, TX
Posts: 13
Quote:
Originally Posted by jonathan180iq View Post
As long as the base of your stand and the vertical leg are flush, then you should be fine.

You do have to tilt the bike just a smidge to get them under. But it's no more precarious than trying to lift any other bike onto a center stand. Once you get a feel for it you'll be fine.
I'm not sure I understand what you're saying. I can get part of the jack under the swing arm on the right but then the bottom part of the wood hits the tire. I can't get it in far enough to get the cutout to "grab" the swing arm. The top of the wood is only about halfway across the swing arm when the bottom if hits the tire.

If I tilt the bike to the right (of the stand) the jack won't go under the swing arm. Guess I could shorten the jack but then I don't know if I"d have enough clearance to spin the wheel.
bschift is offline  
Reply With Quote
Old 08-23-2014, 02:41 AM   #45
Fawlty
Senior Member
 
Fawlty's Avatar
 
Join Date: Jan 2013
Location: Murcia, Spain
Posts: 683
Any chance of posting some photos, so we can see your predicament?
__________________
"It begins here for me on this road. How the whole mess happened I don't know, but I know it couldn't happen again in a million years."

(Johnny Strabbler-The Wild One 1953)



Login or Register to Remove Ads
Fawlty is offline  
Reply With Quote
Old 08-23-2014, 06:44 PM   #46
bschift
Junior Member
 
Join Date: Aug 2013
Location: Whitney, TX
Posts: 13
Well, my bad. If you just tilt the stand a little so the notch on the top goes around the swing arm, when you tilt the bike up, the stand straightens out perfectly.

Oh boy, now I get to clean and oil my chain!

Sorry for the trouble and thanks for the help.
bschift is offline  
Reply With Quote
Old 08-25-2014, 08:06 AM   #47
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
Now you get it!

Glad you got it sorted.
jonathan180iq is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:41 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.