![]() |
#1 |
Junior Member
Join Date: Jun 2013
Location: ireland
Posts: 20
|
whats needed to switch to led turn signals
okay i wanna swap out those big old ugly indicators for some smaller tidier led ones..
is there anything else i need to change in order to do this apart from the indicators themselves? thanks.. Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
If I remember correctly the flasher unit & side stand relay are togerher in the same unit......Just disconnect the two flasher wires & hook to electronic flasher.....(Down on fuse box)
Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
|
![]() |
![]() |
![]() |
#5 | |
Junior Member
Join Date: Jun 2013
Location: ireland
Posts: 20
|
Quote:
think noob.. Login or Register to Remove Ads |
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
I replied above......Its down on the fuse box & you need to determine which two wires run the flasher & remove them from the box & hook to a electronic flasher.
|
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Jun 2013
Location: ireland
Posts: 20
|
okay so the two wires that come from the flashers. and i assume to change the brake light to led you d need to add that wire also to the electronic flasher?
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Nope fore brake light/tail light just change to a LED bulb..(1157)
|
![]() |
![]() |
![]() |
|
|