Turn signal Issue - Page 3

Gz Rider · 10-06-2011, 04:31 PM

...

blaine · 10-06-2011, 05:05 PM

Turn signal bulbs need to be the same as factory or they won't flash correctly.You can upgrade the flasher,but you need to isolate it from the side stand relay,than you can use a electronic flasher.

:cool:

Water Warrior 2 · 10-06-2011, 05:42 PM

Quote:

Originally Posted by blaine

Turn signal bulbs need to be the same as factory or they won't flash correctly.You can upgrade the flasher,but you need to isolate it from the side stand relay,than you can use a electronic flasher.

:cool:

Yup, that would be the solution for a heavier wattage draw. The OEM flasher tends to overheat and not work properly. The electronic flasher will work with a greater load or no no load at all. Great for using LED's. Any standard auto electronic flasher will work. I think a 3 prong flasher would be required.

10-06-2011, 04:31 PM	#21
Gz Rider Senior Member Join Date: Aug 2011 Posts: 852	Re: Turn signal Issue ... __________________ *Alert - This person is a douche. Use these comments and advice at your own risk* Login or Register to Remove Ads
	0

10-06-2011, 05:05 PM	#22
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: Turn signal Issue Turn signal bulbs need to be the same as factory or they won't flash correctly.You can upgrade the flasher,but you need to isolate it from the side stand relay,than you can use a electronic flasher. :cool: __________________ If at first you do succeed, try not to look surprised.
	0