10-28-2007, 10:57 PM
|
#41 |
|
Senior Member
Join Date: Jun 2007
Location: Toledo, OH
Posts: 198
 |
ok here's the pictures. I think they speak for themselves. Another deviation from my original plan was the location of the holes in the ammo cans. Originally I had planned to put the holes 4 in. from the top of can. However the throat on my punch was only 3 1/4" deep so the cans sit a little lower than originally planned. The one potential problem this presented was the front corner hitting the rear shock absorbers. they just barely touched when fully compressed. I used up all the wiggle room in the holes to adjust them so they would't hit the shocks. ask away if you have questions.
     I used 5/16" stainless fasteners: main bolts were 3" long. plate to can bolts were 3/4" long. I used 3/4" diameter hex nuts as spacers. I used some foam rubber to fill in and keep the nut centered around the 5/16" bolt. I would like to find something else to use as spacers that is slightly thinner but these will do for now. I plan to paint the cans when I can find time and install some locks. I'll post updated pics then. Login or Register to Remove Ads |
|
|
|
10-29-2007, 10:29 AM
|
#42 |
|
Member
Join Date: Jul 2007
Location: Chula Vista, CA
Posts: 52
|
Thanks!
Looks good!
-Bob
__________________
-Bob Stretch Some of us serve only to be bad examples for others... |
|
|
|
|
11-04-2007, 06:18 AM
|
#43 |
|
Senior Member
Join Date: Aug 2006
Location: Tallahassee FL
Posts: 945
|
I upgraded to SAW boxes a few months back and never got around to post any photos. SAW boxes are much better then the 50BMG cans.
   [img]http://www.robertkeeney.com/gallery/d/8259-1/2005_GZ250_Ammo_Can_Panniers_SAW_04.jpg          
Login or Register to Remove Ads |
|
|
|
|
11-04-2007, 11:52 PM
|
#44 |
|
Senior Member
Join Date: Jun 2007
Location: Toledo, OH
Posts: 198
|
Looks good. Hmmm lets see now... where can we mount 50mm guns on the GZ250?
|
|
|
|
|
11-10-2007, 08:54 AM
|
#45 |
|
Senior Member
Join Date: Aug 2006
Location: Tallahassee FL
Posts: 945
|
I don't think I could carry 50mm ammo. If there is any such thing. A 308 is 7.62mm.
Ural can be purchased with a rocket launcher:  http://www.pashnit.com/bikes/sidecar-ural.htm Login or Register to Remove Ads |
|
|
|
|
11-12-2007, 08:45 AM
|
#46 |
|
Senior Member
Join Date: Jun 2007
Location: Toledo, OH
Posts: 198
|
Awesome! I want one :-)
|
|
|
|
|
11-12-2007, 12:34 PM
|
#47 |
|
Super Moderator
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
|
I haven't heard about Urals in a long time. That gets me thinking. What would it take to get a side car on the GZ?
I love sidecars. 
|
|
|
|
|
11-12-2007, 01:25 PM
|
#48 |
|
Member
Join Date: Sep 2007
Location: Ohio,USA
Posts: 51
|
What would it take to get a side car on the GZ?
More Power! :lol: |
|
|
|
|
11-14-2007, 06:04 AM
|
#49 |
|
Senior Member
Join Date: Aug 2006
Location: Tallahassee FL
Posts: 945
|
The side car might weigh more than the GZ250 Unless you went with one of those light weights like the racers use.
|
|
|
|
|
11-14-2007, 06:06 AM
|
#50 | |
|
Senior Member
Join Date: Aug 2006
Location: Tallahassee FL
Posts: 945
|
Quote:
|
|
|
|
|
 |
|
|
Linear Mode
