Axle not torque (how to)

steelpix · 10-17-2013, 06:48 PM

I worked on my chain today and loosened the axle nut. But how in the heck do you put a torque wrench on it to tighten it up? The exhaust and the nut are too close together. I just guessed and tightened it without a torque wrench.

5th_bike · 10-17-2013, 06:52 PM

There is a bolt that holds the exhaust to a triangular plate, undo it and you can move the exhaust out of the way and torque wrench the axle nut.

JohnC · 10-17-2013, 08:50 PM

This is called a crow's foot. You have to put it at a right angle to the length of the torque wrench to get an accurate reading.

Water Warrior 2 · 10-17-2013, 08:55 PM

Can you fit the torque wrench on the other end? It really doesn't make any difference which end of the bolt you are torqueing.
You could also go to the trouble of swapping the bolt end for end. Just another case of the bolt not caring and/or you might want to wait till you have the wheel off for a new tire to do the end for end thing.

JohnC · 10-17-2013, 09:46 PM

Quote:

Originally Posted by Water Warrior

Can you fit the torque wrench on the other end? It really doesn't make any difference which end of the bolt you are torqueing.

It might not matter in this application, but the friction load on the bolt is generally much higher than that on the nut, so the load on the threads will be lower if you torque it from the bolt head vs. the nut.

Quote:

You could also go to the trouble of swapping the bolt end for end.

Then you have to move the exhaust to get it out... 6 of one, half dozen of the other...

Water Warrior 2 · 10-18-2013, 12:03 PM

Just offering alternatives. I would go with torqueing from the other end for my own bike.

Just offering alternatives. I would just go with torqueing from the other end on my own bike.

10-17-2013, 06:48 PM	#1
steelpix Member Join Date: Jul 2013 Location: Nashville, TN Posts: 43	Axle not torque (how to) I worked on my chain today and loosened the axle nut. But how in the heck do you put a torque wrench on it to tighten it up? The exhaust and the nut are too close together. I just guessed and tightened it without a torque wrench. Login or Register to Remove Ads
	0

10-17-2013, 06:52 PM	#2
5th_bike Senior Member Join Date: Oct 2007 Location: HoCo, Maryland Posts: 1,349	Re: Axle not torque (how to) There is a bolt that holds the exhaust to a triangular plate, undo it and you can move the exhaust out of the way and torque wrench the axle nut. __________________ 2005 "Saturn Black", stock + tach
	0

10-17-2013, 08:50 PM	#3
JohnC Senior Member Join Date: Aug 2013 Location: New Hampshire Posts: 127	Re: Axle not torque (how to) This is called a crow's foot. You have to put it at a right angle to the length of the torque wrench to get an accurate reading. Login or Register to Remove Ads
	0

10-17-2013, 08:55 PM	#4
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Axle not torque (how to) Can you fit the torque wrench on the other end? It really doesn't make any difference which end of the bolt you are torqueing. You could also go to the trouble of swapping the bolt end for end. Just another case of the bolt not caring and/or you might want to wait till you have the wheel off for a new tire to do the end for end thing.
	0

10-18-2013, 12:03 PM	#6
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Axle not torque (how to) Just offering alternatives. I would go with torqueing from the other end for my own bike. Just offering alternatives. I would just go with torqueing from the other end on my own bike.
	0