Can I assume gn250 parts do not fit my 2000 gz250?

spldart · 06-24-2015, 09:26 PM

I'm talking cylinder, piston, rings and valves.

My compression is getting low and I want an alternative to throwing the bike in the gutter.

**jonathan180iq** · 06-25-2015, 09:46 AM

It's a different head design, if I'm not mistaken.
You can do a little more research, but I'm pretty sure a few people have had similar thoughts to you in the past only to be disappointed.

spldart · 06-25-2015, 11:49 AM

My thought is cylinder, piston and rings. Found a gn250 set in china for 100 bux.

Quote:

Originally Posted by jonathan180iq

It's a different head design, if I'm not mistaken.
You can do a little more research, but I'm pretty sure a few people have had similar thoughts to you in the past only to be disappointed.

spldart · 06-25-2015, 10:05 PM

So... Time to gamble. Do I risk the money or not 0_o

**jonathan180iq** · 06-26-2015, 08:21 AM

Dude if it's just $100, why not? You'll at least get some parts that are useful and you'll forever enhance the knowledge database of usable parts.

spldart · 06-26-2015, 08:33 AM

Kk next paycheck buys this overhaul kit for gn250

**jonathan180iq** · 06-26-2015, 12:59 PM

Absolute worst case scenario, you'll have parts to resell and will have only spent $100.
Good luck.

5th_bike · 06-27-2015, 09:28 PM

Engines look the same, and in Wikipedia FWIW it says that the GN250 'features the same basic powertrain as the GZ250'. Hope it works.

Water Warrior 2 · 06-28-2015, 02:30 AM

Just did a bit of searching. The GN makes 22 ponys, a bit more than the GZ. Too bad they were discontinued a while back. Looks to be a little lower in the saddle too. Could be a great alternative for short folks if they can find a good used one.

celesboy1 · 07-14-2015, 03:55 PM

absolutely YES....go for it....GZ250 , GN250 and GS250X (mine) practically same in all engines component....

06-24-2015, 09:26 PM	#1
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	Can I assume gn250 parts do not fit my 2000 gz250? I'm talking cylinder, piston, rings and valves. My compression is getting low and I want an alternative to throwing the bike in the gutter. Login or Register to Remove Ads
	0

06-26-2015, 08:21 AM	#5
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Dude if it's just $100, why not? You'll at least get some parts that are useful and you'll forever enhance the knowledge database of usable parts. Login or Register to Remove Ads
	0

06-27-2015, 09:28 PM	#8
5th_bike Senior Member Join Date: Oct 2007 Location: HoCo, Maryland Posts: 1,349	Engines look the same, and in Wikipedia FWIW it says that the GN250 'features the same basic powertrain as the GZ250'. Hope it works. __________________ 2005 "Saturn Black", stock + tach
	0

06-25-2015, 09:46 AM	#2
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	It's a different head design, if I'm not mistaken. You can do a little more research, but I'm pretty sure a few people have had similar thoughts to you in the past only to be disappointed.
	0

06-25-2015, 10:05 PM	#4
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	So... Time to gamble. Do I risk the money or not 0_o
	0

06-26-2015, 08:33 AM	#6
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	Kk next paycheck buys this overhaul kit for gn250
	0

06-26-2015, 12:59 PM	#7
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Absolute worst case scenario, you'll have parts to resell and will have only spent $100. Good luck.
	0

06-28-2015, 02:30 AM	#9
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Just did a bit of searching. The GN makes 22 ponys, a bit more than the GZ. Too bad they were discontinued a while back. Looks to be a little lower in the saddle too. Could be a great alternative for short folks if they can find a good used one.
	0

07-14-2015, 03:55 PM	#10
celesboy1 Member Join Date: Mar 2015 Location: indonesia Posts: 36	absolutely YES....go for it....GZ250 , GN250 and GS250X (mine) practically same in all engines component....
	0